69
SECTION 6
STORING AND RECALLING DATA
6.1
Storing Measurements
The sens
ion
™156 Meter can store up to 199 measurements for
each parameter. Store the data and recall it later for reviewing,
downloading, or printing. The following information is stored
(and can be downloaded or printed) for each sample:
The new data is saved in the next available memory location,
numbered from 1 to 199. If no memory locations higher than the
current one are available, the meter will “wrap around” and
choose the next available location. The user can also choose the
storage location.
To store data:
1. After the measurement reading has stabilized, press
STORE
.
The display will prompt
Store Sample #?
(# is the next
available location). The question mark will be flashing.
2. Press
ENTER
to store the measurement reading in that
location number. To store the data in another location, use the
arrow keys to scroll to that location number or enter a
pH
Conductivity
Dissolved Oxygen
Date
Date
Date
Time
Time
Time
Instrument serial number
Instrument serial number
Instrument serial number
Software version
Software version
Software version
An asterisk (*) on the printout
indicates an unstable value was
stored.
An asterisk (*) on the printout
indicates an unstable value was
stored.
An asterisk (*) on the printout
indicates an unstable value was
stored.
Memory location
Memory location
Memory location
Sample concentration in pH
Conductivity in mS or
µ
S
Sample concentration in mg/L
Sample concentration in mV
Total dissolved solids (mg/L)
Sample concentration in %
saturation
Salinity (per mil) ‰
Calculated true barometric
pressure
Cell constant
Temperature
Reference temperature
Sample salinity
Temperature compensation type
TDS type
