Hach Lange 2100AN, Instrument Manual

Page: 96 / 108

96
SECTION 12,
continued
12.3 Diagnostic and Setup Functions
The diagnostic mode accesses information about instrument operation and often is
used when servicing the equipment. Enter the diagnostic mode by pressing the
SETUP
key. Exit from this mode at any time by pressing the
UNITS/Exit
key.
12.3.1 Basic Diagnostic Codes
Access the Table 6 diagnostic information by entering the appropriate code:
Table 6 Diagnostic and Setup Codes
Code Display Description
0 BEEP ON/
BEEP OFF
Keyboard Beeper On/Off
1 FST PRT Fast/Slow Print Device
2 BOTH PRT
Printer Output Selection
3 XXXXXIVL Print Interval
4 XXXXXCON
Internal Printer Contrast
5 XX-XXH/M Set hour/minutes
6 XX-XXM/D
Set month/day
7 YEARXX Set year
8 XX XX XX
Display current time
9 SIGAVGXX Signal Average Buffer Setting
10 1200BD
RS232 Baud Rate Select
11 8 CL RS232 Character Length Select
12 1 SB
RS232 Stop Bit Select
13 NONE PAR RS232 Parity Select
14 XXXXXRMN
Setting Recorder Minimum value
15 XXXXXRMX Setting Recorder Maximum value
16 XXXXXRTN
Setting Recorder Minimum Output
17 XXXXXRTX Setting Recorder Full-Scale Output
18 ZERO REC
Force Recorder to Zero Scale
19 HALF REC Force Recorder to Half Scale
20 FULL REC
Force Recorder to Full Scale
21 PRINT TST Printer Test
22
* Display Test
23 * Keyboard Test
24 *
Memory Test
25 XXXXXNIO Ninety Degree Detector Millivolts, Gain 1
26 XXXXXNI1
Ninety Degree Detector Millivolts, Gain 10
27 XXXXXNl2 Ninety Degree Detector Millivolts, Gain 100
28 XXXXXNI3
Ninety Degree Detector Millivolts, Gain 1000
29 XXXXXFSO Forward Scatter Detector Millivolts, Gain 1
30 XXXXXFS1
Forward Scatter Detector Millivolts, Gain 10
31 XXXXXFS2 Forward Scatter Detector Millivolts, Gain 100
32 XXXXXFS3
Forward Scatter Detector Millivolts, Gain 1000
33 XXXXXTRO Transmitted Detector Millivolts, Gain 1
34 XXXXXTR1
Transmitted Detector Millivolts, Gain 10