3
96-0112 Rev W
July 2010
3. INSTALLATION
S
hipping
B
racket
r
emoval
TL-1/2/3
1. Remove the one (1) hex head bolt that mounts the shipping bracket to the
spindle head, and the two (2) bolts that mount the shipping bracket to the table.
2. After removing shipping bracket, replace two bolts removed from table with
button head screws supplied.
3. Remove the pendant shipping bracket. There are 4 screws securing the
pendant to the arm.
TL-4
1. Remove six red shipping brackets; three from the base of the tailstock, one
from the pendant, one from the traveling door and one from the table to the
spindle.
TL-1/2 Shipping Bracket
l
eveling
1. Position the cross-slide close to the chuck (this is how the machine was
shipped), and place a machinist’s level on the cross-slide, parallel to the X-axis.
TL-1 Shown
