Haag-Streit AT 900 D Instructions For Use Manual Download Page 2

Page: 2 / 24

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

PORTUGUÊS

SVENSKA

INSTRUCTIONS FOR USE

Applanation tonometer

AT 900

18. Edition / 2020 – 01

Introduction

Thank you for choosing a Haag-Streit device. Provided you comply carefully

with the regulations in this instructions for use, we can guarantee the reliable and

unproblematic use of our product.

Purpose of use

The Goldman digital tonometer is an appliance that serves to measure intraocular

pressure, according to the Goldman method. The measuring of the pressure re‑

quires to maintain a uniform applanation of the surface of the cornea. It is specially

indicated in Glaucoma disease.

Contraindication

There is no absolute contraindication for execution of the tonometry. Appropriate

professional assessment and caution are necessary.

WARNING!

Applanation tonometry may only be conducted by appropriately trained

and qualified medical personnel.

WARNING!

Read the instruction manual carefully before commissioning this pro-

duct. It contains important information regarding the safety of the user

and patient.

NOTE!

Federal law restricts this device to sale by or on the order of a physician

or licensed practitioner.

01-IFU_AT900D-7220067-04180_eng.indd 2

21.01.2020 11:12:16

Summary of Contents for AT 900 D

























Search results

Summary of Contents for AT 900 D

Reviews:

Related manuals for AT 900 D

Brands by name

Popular brands

Haag-Streit AT 900 D, Instructions For Use Manual

Search results

Summary of Contents for AT 900 D

Reviews:

Related manuals for AT 900 D

Brands by name

Popular brands