15
============================<ETHERNET PARAMETER SET>===========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
===============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :wx3000.bin
:
Target File Name :wx3000.bin
:
Server IP Address :192.168.0.2
Local IP Address :192.168.0.1
Gateway IP Address :0.0.0.0
FTP User Name :
FTP User Password :
NOTE:
When configuring a parameter, enter a new value, or press
Enter
to accept the default value
that follows a colon. You can type
.
to clear the current input,
-
to return to the previous
parameter field, and
Ctrl+D
to quit from the parameter configuration interface.
Upgrading a system software image file
After configuring the Ethernet port parameters, select
3
from the BootWare main menu to enter the
Ethernet submenu and then select
2
. In this example you upgrade the main system software image file.
The following information appears:
Loading..............................................................................
.....................................................................................
.....................................................................................
.....................................................................................
.....................................................................................
.....................................................................................
.....................................................................................
.....................................................................................
..................Done!
35454328 bytes downloaded!
Updating File flash:/wx3000.bin
The file is exist,will you overwrite it?
[Y/N]Y...............................................................................
.....................................................................................
.....................................................................................
.....................................................................................
.....................................................................................
.....................................................................................
.....................................................................................
.....................................................................................
................................Done!
Finalizing system software image file upgrade
Select
0
to return to the BootWare main menu, and then press
1
to reboot the system.