10
Figure 7
Attach the front mounting brackets to both sides of the switch
3.
Fix the weight-bearing screws packed with the rear mounting brackets on both sides of the switch.
See
.
Figure 8
Install the weight-bearing screws
(1) Three holes for mounting the weight-bearing screw (select one as needed)
(2) Weight-bearing screw
NOTE:
There are three screw holes on each side of the switch for the weight-bearing screws. You
can select a proper location as needed. The rear mounting brackets will support the weight
of the switch through firm contact with the weight-bearing screws.
4.
Determine the switch installation position in the rack and use screws and cage nuts to fix the rear
mounting brackets on the rear square-holed brackets of the rack. See
Figure 9
Install rear mounting brackets
(1) Rear square-holed brackets
(2) Rear mounting bracket