15
Logging in to the device from a local PC
If you can obtain the IP addresses of the Oasis platform, AC, and license server, use this method to
log in to the device.
Logging in to the Oasis platform from the local PC
1.
Connect the PC to the device.
2.
Launch the browser, and enter
https://192.168.0.101:31443
in the address bar. This example
uses a Microsoft Internet Explorer browser and the default Oasis platform IP address.
3.
On the security certificate page that opens, click the
Proceed to 192.168.0.101 (unsafe)
link.
4.
On the login page, enter the username and password, and then click
Sign In
.
If this is the first login, enter the default username (
oasis_root
) and password
(
oasis_root123456
).
Figure4-21 Oasis platform login page
Logging in to the AC
IMPORTANT:
By default, AC is enabled. To disable AC, see "
The factory-configured VLAN-interface 1 of the AC obtains an IP address through the DHCP protocol.
To enable the AC to obtain an IP address through DHCP, make sure the local PC and AC are in the
same subnet. If IP address acquisition through DHCP fails, VLAN-interface 1 of the AC uses the
default IP address 192.168.0.100.
You can also log in to the device from HDM or from the WBC Monitoring Platform to obtain the
current IP address of the AC. For more information, see "
Logging in to the device from HDM
" or
Logging in to the WBC Monitoring Platform
Logging in to the AC from the CLI
Use Telnet to log in to the AC from the CLI.
