6
Figure4-7 Running the HDM KVM
4.
The KVM login window opens. You can enter password
admin.Default.0506
to access KVM.
Launching a KVM or H5 KVM remote console
Restrictions and guidelines
Do not use KVM and H5 KVM at the same time or start the remote console in multiple browsers on
one PC.
The dedicated KVM and H5 KVM modes are available only for HDM-1.30.08 or later.
The unencrypted H5 KVM modes are available only for HDM-1.30.09 or later.
For security purposes, grant full permission to a trustworthy secondary user when you close the
remote console session as the primary user.
Granting full permission to a secondary user removes the full permission from the primary user. Then,
the primary user has only the read-only permission.
The primary user can grant full permission to any secondary user when closing the KVM window. If
the primary user does not grant full permission in 10 seconds, the permissions of secondary users
remain unchanged.
The UID LED of the server flashes if a remote console is active.
Prerequisites
Before you can launch a remote control console, you must perform the following tasks:
•
Make sure your user account has the remote control privilege. If you do not have the remote
control privilege, contact the administrator.
•
To launch the KVM console, make sure your user account has the KVM extended privilege. To
launch the H5 KVM console, make sure your account has the Web and KVM extended
privileges. If you do not have the Web or KVM privilege, contact the administrator.
