manualshive.com logo in svg

H3C WA2612-AGN, Web-Based Configuration Manual

Share
Download
H3C WA2612-AGN Web-Based Configuration Manual Download Page 357

 

344 

Figure 377

 

Configure the access service 

 

 

 

NOTE: 

When you configure access service on the repeater, make sure the radio mode of the repeater is the same
as that of WDS. In this example, radio unit 2 in 802.11n(2.4GHz) mode is specified.  

 

Verifying the configuration 

1.

 

The WDS link has been established for the repeater.  
Select 

Summary

 > 

WDS

 from the navigation tree to enter the 

WDS 

page displaying the WDS 

information. Click radio unit 2 to view the neighbor information.  

Figure 378

 

The page displaying WDS information 

 

 

2.

 

The repeater mode has been configured successfully.  
Select 

Summary

 > 

Radio

 from the navigation tree, and the page displaying radio information 

appears. On the page, you can see that the 802.11n (2.4GHz) radio mode on the repeater 

provides both access and WDS services, and one client has accessed the wireless network 

through the repeater.  

Summary of Contents for WA2612-AGN
































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands