Compliance and Safety Manual
WA 2200 series Wireless LAN
Access Point
Chapter 1 Regulatory Compliance
Information
1-5
1.3 USA regulatory compliance
1.3.1 FCC Part 15
I. US Federal Communications Commission (FCC) EMC
Compliance
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
z
Reorient or relocate the receiving antenna.
z
Increase the separation between the equipment and
receiver.
z
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
z
Consult the dealer or an experienced radio/TV technician for
help.
1.3.2 RF Requirements
1)
RF exposure Hazard Warning
