Operation Manual – Getting Started
H3C VG Series Voice Gateways
Chapter 2 Fundamental Configuration
2-16
Note:
z
If the password of an administrator is lost, you can log onto the system as other
administrator to modify the password. If only one administrator is configured, then
the only way available is to enter Boot menu upon system startup and clear the
username and password. Then restart the VG. Now you can directly log onto the
system as administrator without being prompted to enter username and password.
z
For details about the Boot menu, see the corresponding H3C VG voice gateway
installation manual.
II. Configuring username
Perform the following configuration in system view.
Table 2-9
Configure username
Operation
Command
Add a user
local-user
user-name
[
service-type type
] [
password
{
simple
|
cipher
}
password
]
Delete a user
undo local-user
user-name
By default, no user is configured.
2.3.2 Terminal Security Features
I. CLI security features
z
Nothing is displayed when the user is entering the password.
z
The terminal user will be disconnected after entering wrong password for three
times.
z
After the
idle-timeout
command is executed, if the terminal user enters nothing
within five minutes, he/she will be disconnected.
II. Login modes
The terminal users can log onto the system from the Console port, using Telnet and
through Web. Correspondingly they are called Console users, Telnet users and Web
users respectively.
2.3.3 Configuring Login Authentication and Authorization
The operation tasks include:
z
Configuring login authentication and authorization scheme list
z
Starting login authentication and authorization scheme list
