Operation Manual – Getting Started
H3C VG Series Voice Gateways
Chapter 2 Fundamental Configuration
2-7
Step 4
: You can configure the VG or view its running status through entering
corresponding commands. Also you can enter “?” for online help.
2.1.2 Setting up the Local or Remote Configuration Environment by Using
Telnet
You can set up connection over LAN and WAN (wide area network) with the VG using
Telnet client program and log onto it for further configuration.
Step 1:
Connect the Ethernet port of the workstation through LAN or WAN to the VG.
See Figure 2-12 and Figure 2-13.
PC Telnet Client
VG
LAN
Figure 2-12
Set up local configuration environment using Telnet
PC Telnet Client
LAN
Router
VG
WAN
Figure 2-13
Set up remote configuration environment using Telnet
Note:
For the connection through WAN, make sure the VG is reachable to the workstation.
