7-3
5.
Install the removed security bezel, if any. For more information, see "
Verifying the replacement
For information about the verification, see "
Replacing a compute module and its main board
WARNING!
To avoid bodily injury from hot surfaces, allow the server and its internal modules to cool before
touching them.
CAUTION:
To prevent electrostatic discharge, place the removed parts on an antistatic surface or in antistatic
bags.
Removing a compute module
1.
Power off the server. For more information, see "
2.
Remove the security bezel, if any. For more information, see "
3.
Remove the compute module:
a.
Press the clips at both ends of the compute module inward to release the locking levers.
Figure 7-3 Unlocking a compute module
b.
As shown by callout 1 in
, press the locking levers downward to disengage the
compute module from the midplane.
c.
As shown by callout 2 in
, pull the compute module out of the server.
