H3C UniServer R6900 G3, User Manual

Page: 80 / 214

6-46
To install a TPM:
1.
Power off the server. For more information, see " Powering off the server ."
2.
Disconnect all the cables from the management module.
3.
Remove the management module. For more information, see " Removing the management
module ."
4.
Install the TPM:
a.
Press the TPM into the TPM connector on the management module, as shown in Figure
6-54 .
Figure 6-54 Installing a TPM
b.
Insert the rivet pin as shown by callout 1 in Figure 6-55 .
c.
Insert the security rivet into the hole in the rivet pin and press the security rivet until it is
firmly seated, as shown by callout 2 in
Figure 6-55 .
Figure 6-55 Installing the security rivet