H3C SR6602-X1, Installation Manual

Page: 88 / 102

79
FIP-10
Front panel
Figure 72 FIP-10 front panel
(1) Slot 4 (2) Slot 3
(3) OPEN BOOK mark (4) Status LED (RUN)
(5) Slot 1 (6) Slot 2
The OPEN BOOK mark indicates that the operator must read the following sections before working
with the FIP:
Table 39 References for FIP operations
Operation Reference
Install and remove the FIP See “ Installing a FIP module ” and “ Replacing a FIP module .”
Install and remove MIMs See “ Installing a MIM ” and “ Replacing a MIM .”
Connect network cables See “ Connecting an Ethernet cable .”
Connect optical fibers See “ Connecting a fiber cable .”
Technical specifications
Item Specification
HIM Not supported
MIM 4 MIMs supported at the same time
Hot-swapping Supported
Slot Four