4-1
4
Starting and Configuring the V100-E
Booting
For the initial use of the V100-E, you can only make CLI configuration through the console port.
Setting Up a Configuration Environment
Connecting a console terminal to the V100-E
Connect the RJ-45 connector of the console cable to the console port on the V100-E and the DB-9
connector to the serial interface on the PC (see Figure 4-1).
Figure 4-1
Local configuration through the console port
Setting terminal parameters
Step1
Start the PC (or the console terminal), run on the PC the emulation (the Terminal on Windows 3.1, or the
HyperTerminal on Windows 9X/Windows 2000/Windows XP for example) and create a new connection.
Enter the name of the new connection in the
Name
field and click
OK
Figure 4-2
Create a new connection
