5-10
z
When using FTP to upgrade the application program, make sure that the V100-E has enough flash
memory. If the memory is not enough, you need to use the
delete /unreserved
command to
permanently delete old version files or other files to save the memory space; otherwise, new files
cannot be uploaded.
z
After uploading Boot ROM program using the
put
command, read the bootrom/bootromfull
program from Flash root directory using the
upgrade bootrom
[ full ]
command, and write it into
Boot ROM to complete Boot ROM upgrade.
z
After uploading the application program into the flash memory, you need to rename the program
file to “system” to make the program take effect at next startup.
z
After uploading configuration files into the flash memory, you need to rename the file to “config.cfg”
to make the files take effect at next startup of the system, or use the
startup saved-configuration
command to set the configuration files used for next startup.
z
Download application or configuration files
ftp> get
remote file
local file
After the upload/download, quit the FTP client program.
ftp>quit
Detaching the Web file
When the downloading using FTP is completed, the Web file is included in the application program. You
need to detach it from the application program using the
detach
command.
<SecPath> detach system
System file length 7856557 bytes, http file length 834724 bytes.
<SecPath> dir
Directory of flash:/
0 -rw- 8691281 Jun 16 2009 06:46:36 system
1 -rw- 1830 Jun 17 2009 07:47:16 config.cfg
2 -rw- 834724 Jun 18 2009 02:22:39 http.zip
If the Web file is not included, the system gives the corresponding prompt. The Web file name defaults
to http.zip.
Modifying Boot ROM Password
You can use the Boot menu of the V100-E to change the Boot ROM password.
Start the V100-E. When “System starts booting” appears on the configuration terminal, press
Ctrl
+
D
,
and then the system prompts:
Please input Boot ROM password :
