Installation Manual
H3C SecPath F100-C Firewall
Chapter 5 Maintaining the H3C
SecPath F100-C
5-24
Caution:
z
To enter the Boot menu, you must press <Ctrl+D> within three
seconds after the “System starts booting” prompt appears on the
configuration terminal; otherwise, the system starts decompressing
the program.
z
You need to restart the firewall if you want to enter the Loader
menu after entering the Boot ROM extended segment.
After entering the correct password, press <Enter>to enter the
Boot menu (press <Enter> directly if the password is not set), and the
system displays the information as follows:
Boot Menu:
1: Download Boot ROM program
2: Modify Boot ROM password
3: System booting from Flash
4: Exit and reboot
Enter your choice(1-4):
Following is the description on the options of Boot menu:
z
1: Download Boot ROM program
z
2: Modify Boot ROM password
z
3: Boot the system from flash (This option requires backing
up the extended segment of Boot ROM in flash, refer to 5.3
for details.)
z
4: Exit from the Loader menu and restart the firewall.
