manualshive.com logo in svg

H3C SecPath F100-C, Installation Manual, Page: 33 / 72

Share
Download
H3C SecPath F100-C Installation Manual Download Page 33

Installation Manual 
H3C SecPath F100-C Firewall 

Chapter 3  Installing the 

 

3-10 

III. Connecting an Ethernet cable 

 

  Caution: 

Read the mark above the interface carefully before making connection 
to make sure it is the right interface. 

 

Connect the Ethernet cable as follows: 

The 10/100BASE-T interface on the H3C SecPath F100-C 

firewall supports MDI/MDIX auto-sensing. Therefore, you can connect 
your PC, security gateway, HUB, or LAN Switch to another device 
using either straight-through cable or crossover cable without 
considering whether the two devices are of the same type.  

3.7  Connecting the H3C SecPath F100-C to 
WAN 

The H3C SecPath F100-C firewall provides a 10 Mbps WAN 

interface. For its connection, refer to section 3.6  “Connecting the H3C 
SecPath F100-C to LAN”. 

3.8  Verifying Installation 

Every time you power on the device during the installation, verify 

that: 

z

 

The device has enough space around it for heat dissipation 
and the table is stable. 

z

 

The proper power supply is used. 

Summary of Contents for SecPath F100-C









































































Reviews:

No comments