Installation Manual
H3C SecPath F100-C Firewall
Chapter 4 Starting and Configuring
the H3C SecPath F100-C
4-9
4.2.2 Command Line Interface
I. Features of the CLI
The command line interface (CLI) of the H3C SecPath F100-C
firewall offers series of configuration commands for you to configure
and manage the H3C SecPath F100-C. The CLI allows you to:
z
Configure the device through console port at the local.
z
Telnet to access and manage the local and remote devices.
z
Configure the H3C SecPath F100-C through a dumb
terminal by asynchronous serial interface and AUX port.
z
Define hierarchical user authority so that only authorized
users can configure and manage the H3C SecPath F100-C.
z
Get online help whenever you enter <?>.
z
Test network connectivity quickly with network diagnostic
tools, such as
tracert
and
ping
.
z
Have detailed debugging information for troubleshooting
your network.
z
Enter a command by only entering the conflict-free keyword
portion, because the CLI interpreter supports fuzzy
matching of command keywords. For example, you simply
need to enter
dis
for the
display
command.
II. CLI
The CLI of H3C SecPath F100-C firewall offers you various
commands and allows you to adopt hierarchical user access to block
the unauthorized users. In system view, all the commands are put into
several groups for the convenience of management, each being
associated to a view. You can switch between the views by executing
the proper commands. Usually, you can only execute the commands