Installation Manual
H3C SecPath F100-C Firewall
Chapter 5 Maintaining the H3C
SecPath F100-C
5-22
Caution:
z
When using FTP to upgrade the application program, make sure
that the firewall has enough flash memory. If the memory is not
enough, you need to use the delete /unreserved command to
permanently delete old version files or other files to save the
memory space; otherwise, new files cannot be uploaded.
z
The Boot ROM upgrade is not complete after the Boot ROM
program is uploaded using the
put
command. To complete the
upgrade, use the
upgrade bootrom [ full ]
command to
decompress the bootrom/bootromfull program from the root
directory in the Flash and write it to the Boot ROM.
z
After uploading the application program into the flash memory, you
need to rename the program file to “system” to make the program
take effect at next startup.
z
After uploading configuration files into the flash memory, you need
to rename the file to “config.cfg” to make the files take effect at next
startup of the system, or use the
startup saved-configuration
command to set the configuration files used for next startup.
z
Download an application program/configuration file.
ftp> get
remote file
local file
Step 4
: Quit the FTP client program after the
uploading/downloading.
ftp>
quit
