80
put
Use
put
to upload a file on the client to the FTP server.
Syntax
put
localfile
[
remotefile
]
Default
If no name is assigned to the file to be saved on the FTP server, the name of the source file is used.
Views
FTP client view
Default command level
3: Manage level
Parameters
localfile
: Name of the local file to be uploaded.
remotefile
: File name used after a file is uploaded and saved on the FTP server.
Usage guidelines
When a file is uploaded, it is saved in the user's authorized directory, which can be set with the
authorization-attribute
command on the remote server.
Examples
# Upload source file
vrpcfg.cfg
on the master to the FTP server and save it as
ftpclient.cfg
.
[ftp] put vrpcfg.cfg ftpclient.cfg
227 Entering Passive Mode (192,168,1,46,4,50).
125 ASCII mode data connection already open, transfer starting for /ftpclient.cfg.
226 Transfer complete.
FTP: 1366 byte(s) sent in 0.064 second(s), 21.00Kbyte(s)/sec.
# Upload source file
a.cfg
on the subordinate device with the member ID 2 to the FTP server and save it
as
ftpclienta.cfg
.
[ftp] put slot2#flash:/a.cfg ftpclienta.cfg
227 Entering Passive Mode (192,168,1,46,4,52).
125 ASCII mode data connection already open, transfer starting for /ftpclienta.cfg.
226 Transfer complete.
FTP: 1226 byte(s) sent in 0.065 second(s), 18.00Kbyte(s)/sec.
pwd
Use
pwd
to display the current directory on the FTP server.
Syntax
pwd
Views
FTP client view
Default command level
3: Manage level
