50
Default
IPv4 uses the DSCP value 48 for outgoing Telnet packets on a Telnet server.
Views
System view
Default command level
2: System level
Parameters
dscp-value
: Specifies a DSCP value in the range of 0 to 63.
Examples
# Set the DSCP value for IPv4 to use for outgoing Telnet packets to 30 on a Telnet server.
<Sysname> system-view
[Sysname] telnet server dscp 30
telnet server enable
Use
telnet server enable
to enable the Telnet server.
Use
undo
telnet server enable
to disable the Telnet server.
Syntax
telnet server enable
undo telnet server enable
Default
The default is as follows:
•
In a version prior to R1808P12:
{
If the device has not loaded any configuration file, Telnet service is disabled.
{
If the device is using the factory defaults, Telnet service is enabled.
•
In R1808P12 or later, Telnet service is disabled.
For more information about configuration types, see
Fundamentals Configuration Guide
.
Views
System view
Default command level
3: Manage level
Examples
# Enable the Telnet server.
<Sysname> system-view
[Sysname] telnet server enable
telnet server ipv6 dscp
Use
telnet server ipv6 dscp
to set the DSCP value for IPv6 to use for outgoing Telnet packets on a Telnet
server.
