175
Table 33
Command output on switches except for S5800-32C and S5800-56C
Field Description
State
RPS status:
•
Normal
—The DC cable is correctly connected, and the RPS is supplying power.
•
Absent
—The RPS is not supplying power.
•
Fault
—The DC cable is correctly connected, but the RPS has a problem.
display schedule job
Use
display schedule job
to display the job configured by using the
schedule job
command.
Syntax
display schedule job
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Views
Any view
Default command level
1: Monitor level
Parameters
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the configuration of the job configured by using the
schedule job
command.
<Sysname> display schedule job
Specified command: execute 1.bat
Specified view: system view
Executed time: at 12:00 10/31/2007 (in 0 hours and 16 minutes)
If you change the system time within 16 minutes after you execute the
schedule job
command, the
scheduled task becomes invalid. Then, if you execute the
display schedule job
command again, no
information is displayed.
Table 34
Command output
Field Description
Specified command
Command to be executed.
Specified view
View for the command to be executed.
Executed time
Execution time of the command and the difference between
the current system time and scheduled time.
