140
Default
The system loads patches from the Flash memory.
Views
System view
Default command level
3: Manage level
Parameters
slot
slot-number
: Specifies an IRF member device by its member ID.
file
filename
: Specifies a patch package file name. If no package file is specified, the system loads patch
files from Flash memory.
Usage guidelines
Before loading patches, save the patch file or patch package file to the root directory of the Flash
memory on each member device.
In FIPS mode, the system checks the signature of the patch file for invalidity. If the patch file does not pass
the check, loading the patch file fails.
Examples
# Load patches from patch files for IRF member device 1.
<Sysname> system-view
[Sysname] patch load slot 1
# Load patches from a patch package file for IRF member device 1.
<Sysname> system-view
[Sysname] patch load slot 1 file flash:/patchpackege.bin
patch location
Use
patch location
to configure the patch file location.
Syntax
patch location
patch-location
Default
The patch file location is
flash:
.
Views
System view
Default command level
3: Manage level
Parameters
patch-location
: Specifies the patch file location, a string of 1 to 64 characters. It can be a root directory
of a storage media or be in the format of "root dir patch file name", depending on the device
model.
Usage guidelines
This command does not take effect for patch package files.
