H3C S5120-EI Series, Operation Manual

Page: 35 / 1191

Access Volume Organization
Manual Version
6W101-20100305
Product Version
Release 2202
Organization
The Access Volume is organized as follows:
Features Description
Ethernet Port
This document describes:
z
Combo Port Configuration
z
Basic Ethernet Interface Configuration
z
Configuring Flow Control on an Ethernet Interface
z
Configuring the Suppression Time of Physical-Link-State Change on
an Ethernet Interface
z
Configuring Loopback Testing on an Ethernet Interface
z
Configuring a Port Group
z
Configuring an Auto-negotiation Transmission Rate
z
Configuring Storm Suppression
z
Setting the Interval for Collecting Ethernet Interface Statistics
z
Enabling Forwarding of Jumbo Frames
z
Enabling Loopback Detection on an Ethernet Interface
z
Configuring the MDI Mode for an Ethernet Interface
z
Testing the Cable on an Ethernet Interface
z
Configuring the Storm Constrain Function on an Ethernet Interface
Ethernet Link
aggregation
Ethernet Link aggregation aggregates multiple physical Ethernet ports
into one logical link. This document describes:
z
Basic Concepts of Link Aggregation
z
Configuring a Static Aggregation Group
z
Configuring a Dynamic Aggregation Group
z
Configuring an Aggregate Interface
z
Configuring a Load Sharing Mode for Load-Sharing Link Aggregation
Groups
Port Isolation
The port isolation feature allows you to isolate different ports within the
same VLAN. This document describes:
z
Introduction to Port Isolation
z
Configuring the Isolation Group