H3C S5120-EI Series, Operation Manual

Page: 219 / 1191

2-3
To do… Use the command… Remarks
Exit policy view
quit
—
Apply the QoS policy See Applying a QoS Policy Required
Applying a QoS Policy
For details about applying a QoS policy, see
QoS Configuration
in the
QoS Volume
.
Apply a QoS policy to an interface
By applying a QoS policy to an interface, you can regulate the traffic sent or received on the interface. A
policy can be applied to multiple interfaces, but in inbound direction of an interface, only one policy can
be applied.
Follow these steps to apply a QoS policy to an interface:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter interface
view
interface interface-type
interface-number
Enter
interface
view or port
group view
Enter port
group view
port-group manual
port-group-name
Use either command
Settings in interface view take
effect on the current interface;
settings in port group view take
effect on all ports in the port
group.
Apply a policy to the interface
or all ports in the port group
qos apply policy policy-name
inbound
Required
For details about the
qos apply policy
command, see
QoS Commands
in the
QoS Volume
.
Apply a QoS policy to a VLAN
You can apply a QoS policy to a VLAN to regulate the traffic sent or received on all ports in the VLAN.
Follow these steps to apply the QoS policy to a VLAN:
To do… Use the command… Remarks
Enter system view
system-view
—
Apply a QoS policy to a VLAN
qos vlan-policy policy-name
vlan vlan-id-list inbound
Required