57
Figure 58
Load applications by using FTP through Ethernet port
2.
Run the FTP Server program on the server
Run FTP Server on the server connected with the switch’s Ethernet port, configure the FTP username and
password, and specify the path of the boot file to be downloaded.
3.
Run the terminal emulation program on the PC connected with the switch’s console port. Start the
switch and enter the Boot ROM menu, and then enter the protocol parameter setting menu.
To load the Boot ROM file, enter
6
in the Boot ROM menu after the system displays “Enter your
choice(0-9):” to enter the Boot ROM upgrade menu.
1. Update full BootRom
2. Update extended BootRom
3. Update basic BootRom
0. Return to boot menu
Enter your choice(0-3):
4.
Enter the protocol parameter setting menu
Enter
1
to update the complete Boot ROM file.
Bootrom update menu:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):
5.
Configure the switch to load the Boot ROM file through FTP
In the protocol parameter setting menu, enter
2
to upgrade the Boot ROM file by using FTP, and then set
the FTP parameters.
Load File Name :update.bin
Server IP Address :10.10.10.2
Local IP Address :10.10.10.3
Gateway IP Address :0.0.0.0
FTP User Name :5120
FTP User Password :123
Table 22
Description of the FTP parameters
Item Description
Load File Name :
Name of the file to be downloaded
Server IP Address :
IP address of the PC
Local IP Address :
IP address of the switch
Gateway IP Address :
IP address of the gateway