28
NOTE:
•
Remove the cushion, if any, from the dent before installation.
•
To ensure the firmness of installation, be sure to use four permanent magnets to secure each switch.
Step2
Attach the magnet-mounted switch to the specified location. Do not get your fingers stuck between.
Figure 34
Magnet mounting
(1)
(2)
(3)
(1) Blind nut in the dent of the switch bottom
(2) Permanent magnet
(3) M3*6 countersunk head screw
CAUTION:
•
Apply magnet mounting to only the above two models. Otherwise, a falloff or mis-operation may occur.
•
Select the installation location carefully. In the case of poor surface, magnet mounting may not be
reliable.
•
Put the switch at a stable place free from vibrations or shocks. Otherwise, personal injuries or equipment
damage may occur.
•
Avoid installing the switch at a high place because bodily injuries or equipment damage may occur in
case of a falloff.
•
Avoid frequently moving the desk-mounted switch because such movements may damage the surface
coating.
•
To install the device vertically, keep the front panel of the switch facing downwards and the two sides
with ventilation holes vertical to the ground.
•
Make sure that the weight of external cables does not bring about a falloff, which may result in bodily
injuries or equipment damage.
•
Keep magnetic cards away from magnets to avoid erasure of any information.
•
Keep computers and monitors that are easily influenced by magnetic fields away from magnets.
Otherwise, faults may occur to these electronic devices.