19
Installing an LPU with common ejector levers
1.
Remove the filler panel from the target LPU slot.
The filler panel removal procedure is the same for LPU and MPU slots. You can see callout 1
in
for reference.
Keep the removed filler panel secure for future use.
2.
As shown by
, orient the LPU with the lettering on it upright. Hold the LPU by the front
panel with one hand and support the bottom with the other. Push the LPU steadily into the slot
along the guide rails.
Keep the LPU parallel to the slot to avoid touching other components in the chassis.
3.
As shown by callout 2 in
, pull the ejector levers of the LPU outward when most part
of the LPU is inserted in the slot.
4.
Push the LPU until the brakes on its ejector levers touch the slot edges tightly.
5.
As shown by callout 3 in
, continue to push the LPU by its middle part on the front
panel until you cannot push it further.
6.
As shown by callout 4 in
, push the ejector levers inward until they come in close
contact with the front panel.
7.
As shown by callout 5 in
, fasten the captive screws on the LPU.
