15
4.
As shown by callout 4 in
, push the MPU until the handle breaks touch the slot edges
tightly.
5.
As shown by callout 5 in
, continue to push the MPU handle until the MPU is secure
in position.
6.
Fasten the captive screws on the MPU.
Figure 14 Installing an MPU (S12504X-AF switch)
(1) Loosen the captive screws and remove the filler panel
(2) Pivot up the handle
(3) Push the MPU into the slot along the guide rails
(4) Push the MPU until the handle breaks touch the slot edges tightly
(5) Push the handle until the MPU is secure in position
(6) Fasten the screws on the MPU
Installing LPUs
CAUTION:
To prevent a filler panel from being drawn into the chassis when fan speed is high, use both hands
to grasp the filler panel by its two sides during filler panel installation and removal on an operating
switch.
1
3
2
5
4
6
