70
IFP Counter 1024 768 0 256 75%
EFP ACL 1024 0 0 1024 0%
EFP Meter 512 0 0 512 0%
EFP Counter 512 0 0 512 0%
IFP
—Resource usage for inbound traffic.
EFP
—Resource usage for outbound traffic.
2.
Delete unnecessary ACLs to release resources if the failure is caused by ACL resource
insufficiency. Delete unnecessary ACLs that use Meter or Counter resources if the failure is
caused by Meter or Counter resource insufficiency.
If you cannot release enough resources, go to step
If the ACL resources are sufficient, the reason might be that the ACL conflicts with a specific
algorithm in the ASIC chip. In this case, go to step
3.
Apply the packet filter or QoS policy again.
4.
If the issue persists, collect device information and contact H3C Support.
ACL application failure without an error message
Symptom
The system applies a packet filter or an ACL-based QoS policy to the hardware. However, the ACL
does not take effect.
Troubleshooting flowchart
Figure 25 Troubleshooting ACL application failure
Overlapping
ACLs exist?
Yes
No
No
Yes
Conflicting behaviors
for packets matching
overlapping ACLs?
Revise ACLs/packet
filters/QoS policies
Yes
No
Resolved?
Collect information and
contact the support
End
Failure to apply an ACL
