69
Warning: Classifier-behavior test in policy test applied on vlan 4079 failed in slot 2.
Reason: Not enough hardware resource.
Troubleshooting flowchart
Figure 24 Troubleshooting ACL application failure
Solution
Insufficient hardware resources might be insufficient Counter, Meter, or ACL resources.
To resolve the issue:
1.
Check the ACL, Counter, and Meter resource usage for insufficiency.
Execute the
display qos-acl resource
command to display the resource usage. If the number
of ACLs to be applied is higher than the value of the
Remaining
field, resources are insufficient.
If the ACLs are to be applied globally, check remaining resource usage on all cards.
[Sysname] display qos-acl resource
Interfaces: XGE2/1/0/1 to XGE2/1/0/21, XGE2/1/0/22
XGE2/1/0/23 to XGE2/1/0/24
---------------------------------------------------------------------
Type Total Reserved Configured Remaining Usage
---------------------------------------------------------------------
VFP ACL 1024 768 0 256 75%
IFP ACL 2048 1792 1 255 87%
IFP Meter 1024 896 0 128 87%
IFP Counter 1024 896 0 128 87%
EFP ACL 1024 0 0 1024 0%
EFP Meter 512 0 0 512 0%
EFP Counter 512 0 0 512 0%
Interfaces: XGE2/1/0/25 to XGE2/1/0/48
---------------------------------------------------------------------
Type Total Reserved Configured Remaining Usage
---------------------------------------------------------------------
VFP ACL 1024 768 0 256 75%
IFP ACL 2048 1536 1 511 75%
IFP Meter 1024 768 0 256 75%
Hardware resources
are sufficient?
Delete unnecessary ACLs
Yes
No
No
Yes
Resolved?
Collect information and
contact the support
End
Failure to apply an ACL
