5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 1/1/2 ms
# Save the configuration.
<Device> save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait...
Saved the current configuration to mainboard device successfully.
Slot 1 Cpu 0:
Save next configuration file successfully.
# Identify MPUs on the device.
<Device> display device
Slot No. Brd Type Brd Status Software Version
0 LST2MRPNC1 Master s12500-CMW710-R7328P01
1 LST2MRPNC1 Standby s12500-CMW710-R7328P01
2 NONE Absent NONE
3 LST1GT48LEC1 Normal s12500-CMW710-R7328P01
4 NONE Absent NONE
5 NONE Absent NONE
6 NONE Absent NONE
7 NONE Absent NONE
8 NONE Absent NONE
9 NONE Absent NONE
10 NONE Absent NONE
11 NONE Absent NONE
12 NONE Absent NONE
13 NONE Absent NONE
14 LST2SF08C1 Normal s12500-CMW710-R7328P01
15 NONE Absent NONE
16 NONE Absent NONE
17 NONE Absent NONE
18 NONE Absent NONE
The output shows that the switch has two MPUs: one active MPU in slot 0 and one standby MPU
in slot 1. You must upgrade both MPUs.
# Use the username
123456
and the password
123456
to log in to the FTP server.
<Device> ftp 192.168.100.14
Connected to 192.168.100.14 (192.168.100.14).
220 3Com 3CDaemon FTP Server Version 2.0
User (192.168.100.14:(none)): 123456
331 User name ok, need password
Password:
230 User logged in
Remote system type is UNIX.
Using binary mode to transfer files.