(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait...
Saved the current configuration to mainboard device successfully.
Slot 1 Cpu 0:
Save next configuration file successfully.
# Identify MPUs on the device.
<Device> display device
Slot No. Brd Type Brd Status Software Version
0 LST2MRPNC1 Master S12500-CMW710-R7328P01
1 LST2MRPNC1 Standby S12500-CMW710-R7328P01
2 NONE Absent NONE
3 LST1GT48LEC1 Normal S12500-CMW710-R7328P01
4 NONE Absent NONE
5 NONE Absent NONE
6 NONE Absent NONE
7 NONE Absent NONE
8 NONE Absent NONE
9 NONE Absent NONE
10 NONE Absent NONE
11 NONE Absent NONE
12 NONE Absent NONE
13 NONE Absent NONE
14 LST2SF08C1 Normal S12500-CMW710-R7328P01
15 NONE Absent NONE
16 NONE Absent NONE
17 NONE Absent NONE
18 NONE Absent NONE
The output shows that the device has two MPUs: one active MPU in slot 0 and one standby MPU
in slot 1. You must upgrade both MPUs.
# Use TFTP to download the upgrade file from the TFTP server to the root directory of the storage
medium on the active MPU.
<Device> tftp 192.168.100.14 get s12500.ipe
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 70.7M 100 70.7M 0 0 1193k 0 0:00:50 0:00:50 --:--:-- 1127k
# Specify the upgrade file as the main startup image file for both MPUs.
<Device> boot-loader file flash:/s12500.ipe slot 0 main
Verifying image file.........Done.
Images in IPE:
S12500-CMW710-BOOT-test.bin
S12500-CMW710-SYSTEM-test.bin
This command will set the main startup software images. Continue? [Y/N]:y
Decompressing file S12500-CMW710-BOOT-test.bin to cfa0:/S12500-CMW710-BOOT-test.bin
..................................................Done.
Decompressing file S12500-CMW710-SYSTEM-test.bin to cfa0:/S12500-CMW710-SYSTEM
-test.bin...................................................................
................................................................................