manualshive.com logo in svg

H3C S12500 Series, Software Upgrade, Page: 19 / 24

Share
Download
H3C S12500 Series Software Upgrade Download Page 19

# Start the TFTP server and specify a working directory. This example uses the 3CDaemon TFTP 

server. (Details not shown.) 

Figure 11

 

Configuring the TFTP server 

 

 

3.

 

Upgrade the device: 

a.

 

Upgrade software on the standby MPU: 
# Use a straight-through Ethernet cable to connect the management Ethernet interface 
(M-GigabitEthernet 0/0/0) on the standby MPU to the TFTP server. 
# Disable startup software version check for the standby MPU at startup. 

<Switch> system-view 

[Switch] version check ignore 

# Save the configuration. 

[Switch] save 

The current configuration will be written to the device. Are you sure? [Y/N]:y 

Please input the file name(*.cfg)[flash:/startup.cfg] 

(To leave the existing filename unchanged, press the enter key): 

flash:/startup.cfg exists, overwrite? [Y/N]:y 

Validating file. Please wait... 

Saved the current configuration to mainboard device successfully. 

Slot 0 Cpu 0: 

Save next configuration file successfully. 

[Switch] quit 

# Reboot the standby MPU. 

<Switch> reboot slot 1 

RAM test successful. 

System is starting... 

Press Ctrl+D to access BASIC-BOOTWARE MENU... 

Booting Normal Extended BootWare 

Summary of Contents for S12500 Series

























Reviews:

No comments