H3C S12500 Series Software Upgrade Download Page 14 | Manualshive

Page: 14 / 24

H3C S12500 Series Software Upgrade Download Page 14

1 LST2MRPNC1 Standby s12500-CMW710-R7328P01

2 NONE Absent NONE

3 LST1GT48LEC1 Normal s12500-CMW710-R7328P01

4 NONE Absent NONE

5 NONE Absent NONE

6 NONE Absent NONE

7 NONE Absent NONE

8 NONE Absent NONE

9 NONE Absent NONE

10 NONE Absent NONE

11 NONE Absent NONE

12 NONE Absent NONE

13 NONE Absent NONE

14 LST2SF08C1 Normal s12500-CMW710-R7328P01

15 NONE Absent NONE

16 NONE Absent NONE

17 NONE Absent NONE

18 NONE Absent NONE

The output shows that the device has two MPUs: one active MPU in slot 0 and one standby MPU
in slot 1. You must upgrade both MPUs.
# Specify the upgrade file as the main startup image file for both MPUs.

<Device> boot-loader file flash:/s12500.ipe slot 0 main

Verifying image file.........Done.

Images in IPE:

S12500-CMW710-BOOT-test.bin

S12500-CMW710-SYSTEM-test.bin

This command will set the main startup software images. Continue? [Y/N]:y

Decompressing file S12500-CMW710-BOOT-test.bin to cfa0:/S12500-CMW710-BOOT-test.bin

..................................................Done.

Decompressing file S12500-CMW710-SYSTEM-test.bin to cfa0:/S12500-CMW710-SYSTEM

-test.bin...................................................................

................................................................................

......................................Done.

This command will set the main startup software images. Continue? [Y/N]:y

The images that have passed all examinations will be used as the main startup so

ftware images at the next reboot on slot 0.

<Device> boot-loader file boot flash:/s12500-cmw710-boot-test.bin system

flash:/s12500-CMW710-SYSTEM-test.bin slot 1 main

This command will set the backup startup software images. Continue? [Y/N]:y

The images that have passed all examinations will be used as the main startup so

ftware images at the next reboot on slot 1.

# Specify the current startup image file as the backup startup image file for both MPUs. This

setting ensures that the device can start up if the upgrade file is corrupt or not correct.

<Device> boot-loader file boot flash:/s12500-CMW710-BOOT-old.bin system

flash:/s12500-CMW710-SYSTEM-old.bin slot 0 backup

This command will set the backup startup software images. Continue? [Y/N]:y

The images that have passed all examinations will be used as the backup startup so

ftware images at the next reboot on slot 0.

«
...
12
13
14
15
16
...
»

Summary of Contents for S12500 Series

























Reviews:

No comments