manualshive.com logo in svg

H3C S12500 Series, Software Upgrade, Page: 11 / 24

Share
Download
H3C S12500 Series Software Upgrade Download Page 11

H3C  12508  uptime  is  0  weeks,  0  days,  12  hours,  8  minutes                          

Last  reboot  reason  :  Power  on                                                    

Boot  image:  flash:/s12500-cmw710-boot-test.bin                                  

Boot  image  version:  7.1.045,  Release  7328P02                                      

  Compiled  Jul  28  2014  17:32:35                                                  

System  image:  flash:/s12500-cmw710-system-test.bin                              

System  image  version:  7.1.045,  Release  7328P02                                    

  Compiled  Jul  28  2014  17:32:35                                          

---- More ---- 

2.

 

Verify that the software images on the MPUs are the same: 
# Display the current software images and startup software images on the active MPU. 

<Device> display boot-loader slot 0 

Software images on slot 0: 

Current software images: 

  flash:/s12500-cmw710-boot-test.bin 

  flash:/s12500-cmw710-system-test.bin 

Main startup software images: 

  flash:/s12500-cmw710-boot-test.bin 

  flash:/s12500-cmw710-system-test.bin 

Backup startup software images: 

  flash:/s12500-cmw710-boot-old.bin 

  flash:/s12500-cmw710-system-old.bin 

# Display the current software images and startup software images on the standby MPU. 

<Device> display boot-loader slot 1 

Software images on slot 1: 

Current software images: 

  flash:/s12500-cmw710-boot-test.bin 

  flash:/s12500-cmw710-system-test.bin 

Main startup software images: 

  flash:/s12500-cmw710-boot-test.bin 

  flash:/s12500-cmw710-system-test.bin 

Backup startup software images: 

  flash:/s12500-cmw710-boot-old.bin 

  flash:/s12500-cmw710-system-old.bin 

Configuration files 

# 

interface M-GigabitEthernet0/0/0 

 port link-mode route 

 ip address 192.168.100.66 255.255.255.0 

# 

Example: Using the device as an FTP server to upgrade 

software 

Network requirements 

As shown in 

Figure 5

: 

Summary of Contents for S12500 Series

























Reviews:

No comments