H3C MSR 20 Series, Manual

Page: 50 / 149

Interface Card and Interface Module Manual
H3C MSR 20/30/50 Series Routers
Chapter 2 Smart Interface Cards
2-22
Table 2-13
Description of the LEDs on SIC-1FXS/SIC-1FXO and SIC-2FXS/SIC-2FXO
panels
LED Description
LINK
OFF means the link is idle. ON means the link is being occupied
for call connection.
ACT
OFF means the link is idle. ON means the link is being occupied
for communication.
2.6.4 Interface Cable
Connection cables for SIC-1FXS/SIC-1FXO and SIC-2FXS/SIC-2FXO are telephone
cables with ferrite core. Both ends of the cables are RJ11 connectors. For cable pinouts,
see
Low-End and Mid-Range Series Routers Cable Manual
.
Caution:
The standard shipment package of SIC-1FXS/SIC-1FXO and SIC-2FXS/SIC-2FXO
includes a ferrite core telephone cable.
2.6.5 Connecting the Interface Cable
Caution:
z
You should connect a cable to the port with the correct mark. Misplugging is prone
to impair the SIC/MIM and even damage the router.
z
When the telephone cable is used outdoors, it is recommended that users install a
special lightning arrester on the input end of the cable in order to avoid the lightning
effects more efficiently.
z
One end of the telephone cable has a ferrite core. To ensure the compatibility of the
Router, users should connect the end with the ferrite core to the Router.
If the SIC is properly installed, follow these steps to connect the cable:
Step 1: Connect the end with the ferrite core to a RJ11 port of SIC-FXS/SIC-FXO;
Step 2: Insert the other end to
z
a telephone or fax or the AT0 loop trunk if a SIC-1FXS/SIC-2FXS is installed;