H3C MSR 20 Series, Manual, Page: 131 / 149

Interface Card and Interface Module Manual
H3C MSR 20/30/50 Series Routers
Chapter 3 Multifunctional Interface Modules
3-47
Table 3-27
Interface attributes of MIM-1G.SHDSL module
Attribute MIM-1G.SHDSL module
Connector RJ11
Number of connectors 1
Interface standard G.991.2
Interface rate
In single-pair mode, supports the sending/receiving
independent symmetric speed in the range 192 kbps
to 2304 kbps, with the step length being 8 kbps.
Cable Telephone cable
Supported service G.SHDSL access over telephone lines
3.13.3 Interface LEDs
MIM-1G.SHDSL panel is shown in the following figure:
Figure 3-54
MIM-1G.SHDSL panel
The following table describes the LEDs on the MIM-1G.SHDSL panel:
Table 3-28
Description of the LEDs on the MIM-1G.SHDSL panel
LED Description
LINK OFF means no link is present; ON means a link is present.
ACT
OFF means no data is being transmitted or received; blinking
means data is being received or/and transmitted.
3.13.4 Interface Cable
The MIM-1G.SHDSL module uses regular telephone cables for connection.
Note:
Telephone cables have been included in the standard shipment package of
MIM-1G.SHDSL.