Interface Card and Interface Module Manual
H3C MSR 20/30/50 Series Routers
Chapter 1 Overview
1-10
Step 5: Power on the Router, and check the LEDs of the corresponding slot on the front
panel: ON means that the MIM is operating normally and OFF means that the POST of
the MIM has failed. In the latter case, please contact your agent.
Figure 1-3
Installing a MIM (1)
Figure 1-4
Installing a MIM (2)
III. Removing a MIM
Follow these steps to remove a MIM:
Step 1: Place the rear panel of the Router towards you;
Step 2: Turn off the power switch of the Router and unplug the power cord;
Step 3: Unplug all interface cables from the rear panel of the Router;
Step 4: Loosen the captive screws at both sides of the MIM;
Step 5: Pull the MIM towards you until it is completely separated from the bottom of the
router.