background image

 

5-20 

N]:y 

  Now updating bootrom, please wait... 

Step3 

Load the application file, and specify the file as the main program file.  

<H3C> boot-loader file update.bin slot 1 main 

  This command will set the boot file of the specified board. Continue? [Y/N]:y 

  The specified file will be used as the main boot file at the next reboot on slot 1!  

<H3C> display boot-loader 

Slot 1 

The current boot app is:  flash:/update.bin 

The main boot app is:     flash:/update.bin 

The backup boot app is:   flash:/update.bin 

<H3C> reboot 

 

 

z

 

After loading the application file, use the 

reboot

 command to restart the switch to make the update 

take effect (make sure you have saved other configurations before restart).  

z

 

If the flash memory does not have enough space, you can load the Boot ROM file first, and then 
delete certain application files from the flash memory (you are recommended to delete the unused 
host program files); then, load the application file to the switch through FTP for update.  

z

 

Avoid any power failure during the loading process.  

 

Loading Software Using TFTP 

Loading a file through TFTP is similar to loading a file through FTP. The switch can serve only as a 
TFTP client that downloads the file from the TFTP server to its flash memory. The procedure after 
download is the same as loading the file remotely through FTP.  

 

Summary of Contents for H3C S5800-32F















































































































Reviews: