3-18
Connecting a Power Cord to the PSR150-A/PSR150-D
Connecting a power cord to the PSR150-A
Step1
Pull the bail latch leftwards (see
Figure 3-29
).
Step2
Connect one end of the AC power cord to the AC receptacle on the power module (see callout 1 in
Figure 3-30
).
Step3
Pull the bail latch rightwards to secure the plug to the AC receptacle (see callout 2 in
Figure 3-30
).
Step4
Connect the other end of the AC power cord to the external AC power supply system.
Figure 3-29
Connect an AC power cord I
Figure 3-30
Connect an AC power cord II
①
②
Connecting a power cord to the PSR150-D (–48 VDC equipment-room power supply)
Step1
Keep the upside of the DC plug shipped with the device on top and plug it in the DC receptacle (see
callout 1 in
Figure 3-31
). (If you plug it with the upside down, the insertion is not smooth because of the
specific structure design of the DC receptacle and the plug.)
Step2
Use a flat-blade screwdriver to fix the two screws on the DC plug clockwise to secure the plug to the DC
receptacle (see callout 2 in
Figure 3-31
).
Step3
Connect the other end of the DC power cord to the equipment-room power supply system.
