58
DO NOT DIVE.
Swim spa Controls
Swim spa Behavior
114
DO NOT DIVE.
FREEZE PROTECTION
If the temperature sensors within the heater detect a low enough temperature, then the water
devices automatically activate to provide freeze protection. The water devices will run either
continuously or periodically depending on conditions.
CLEAN-UP CYCLE (OPTIONAL)
When a pump is turned on by a button press, a clean-up cycle begins 30 minutes after the pump
is turned off or times out. The heat/filter pump and the ozone generator will run for 30 minutes
or more, depending on the system. If the swim spa has a 24hr circulation pump which performs
as the heat and filter pump, the cleanup cycle will not apply as the 24hr circulation pump provides
constant filtration. On some systems, you can change this setting. See the Cleanup Cycle section in
Additional Settings.
