46
DO NOT DIVE.
102
DO NOT DIVE.
Swim spa Controls
The Main Screen
ICON SPECIFICATIONS
1.
= High Temperature Range
= Low Temperature Range
2.
= Ready Mode
= Ready And Rest Mode
= Rest Mode
3.
= Filter1 Mode
= Filter2 Mode
= Filter1 and 2 Mode
4.
= Ozone is Running.
If you don't see the icon that means the Ozone is OFF.
5.
= Cleanup Cycle is Running.
If you don't see the icon that means the Cleanup Cycle is OFF.
6.
= Wi-Fi icon
just indicates that the Wi-Fi link is connected. It does not indicate
signal strength.
7.
Lock Icon:
When displayed, indicates the panel is in a locked mode. To unlock or lock a setting
or panel lock, you press and hold the corresponding icon for 5+ seconds until the text and icon
change to the opposite state.
There are 2 lock icons that can be shown on the title bar of most screens. A tall skinny one
representing a settings lock is applied. It is shown on screens that are affected by the settings
lock. And the standard lock icon which represents the Panel being locked. If both settings
and panel are locked, only the panel lock will show since the settings lock doesn’t do much in
that situation. When the panel is locked, the Settings Menu Screen will only show items not
affected by that lock (System Info and Lock Screens).
8.
= Invert (or flip) Screen
9.
= Lights is turned ON
= Light is Inactive
= Light is Disabled
10.
= Music is Active*
= Music is Inactive
= Music is Disabled
*Only if Fusion Touch Sound is equipped. Options vary by model.
11.
Message Waiting Indicator:
The Message Waiting Indicator will show one of the following icons:
= Fatal error
(Swim spa can’t function until it’s fixed)
= Normal Error or Warning
= Reminder Message
= Information Message
Touch the Indicator to go to a Message Screen which shows the message.
Some messages will include the “Call for Service” text as it requires a service technician to
fix the problem. If the panel is locked and a message alert appears, you will be taken to the
UNLOCK screen before you can clear the message.
Touching the Error/Warning/Reminder/Info Icon on the Message Screen will take you to the
System Information Screen to allow for troubleshooting over the phone or for a field service
tech to better understand what is going on. Exiting the System information Screen will take
you back to the Message Screen in that situation.
12.
Set Temperature Up:
Adjust set temperature higher.
13.
= Swim Spa Equipment Control Icon.
Brings up a screen where the therapy jets, blower or
other equipment can be controlled. While on the Swim Spa Equipment Screen, you can press
Jets button once for low speed, and if configured press it again for high speed.
= Jet is
Inactive.
Indicates if a pump is running or not.
