H2fl ow Controls
FlowVis®
10
Installation Locations
7. installation locations
✓
✓
✓
✓
Filter
Heater
Salt Cell
1 = IDEAL
2 = GOOD
3 = ACCEPTABLE
4 = AVOID
✓
✓
X
X
7.1 Systems using Salt Generator Cells
Due to the fact that Salt Generator Cells have their electrical supply turned off
under low or low fl ow conditions, there is virtually no possibility of damage
being caused to the FlowVis unit by these devices. Therefore, the primary
installation consideration is where will the unit provide the greatest benefi t to
the customer. For example, it is generally recommended that there is a Check
Valve installed between the Chlorine Feeder / Generator and the Heater. Given
that FlowVis models for 1.5”, 2” and 2.5” plumbing have an integrated Check
Valve, this would be an ideal location to install FlowVis.
Fig.1.7
