77. Glue together parts E3/E4
and E8 as shown above.
82. Glue the float struts E1 to the
floats. When dry, mark a line 80mm
from the top of the float onto the
strut.
Wing Float Assembly.
78. Add to this sub assembly the 2 sides
of the
floats
parts E6.
79. Add the top to the floats
using part E2.
80. Form the underneath of the floats
using part E7. Due to the curve these
will require pinning in place as the glue
dries.
81. Cap the backend of the
float
s
using part E5
.
83. Glue the struts to the servo
mounts exactly on the 80mm mark
so that they are both identical
84. Screw the servo mount/
float assembly to the wing.
Page 18
