4
7
. Using parts B17 and B18 construct the
wing
servo mount.
These are also the wing float
mounts, see further on in the manual.
4
6
. Glue into place the leading edge B15. When the glue has
dried sand to the profile shown.
4
8
.
Sand the trailing edge
of the wings then
glue
2
mm
balsa strips
to the trailing edge.
4
5
.
Add the top trailing edge sheeting B23 and the
rib capping strips B24. The capping strips are glued
to the top and bottom of the wing ribs in between
the leading edge and trailing edge sheeting.
4
9
.
Laminate 2 off B20
8mm balsa sheet
together and
glue to
each
wing tip.
50
. Sand the
wing tips to shape as shown. At this
point the rest of the wing can be sanded as well to
smooth out the joints.
Page 12
