Horizontal Stabilizer.
71. Trial fit the vertical stabilizer to the rear of the fuselage, adjust the
fit by sanding or trimming
as necessary. When satisfied with the fit
glue into position, ensure it stays vertical to the fuselage
as the the
glue dries.
Once this has set add the rear skid/reinforcement part D8 as shown.
Rudder.
65. Glue parts D4/D5/D6
and D7 to form the frame of
the rudder.
66. Add the horizontal
braces D12 and D13.
67. Mark the leading edge
of the rudder with a V as
shown above for the hinge
line.
68. Sand or plane the
edges of the rudder in a V
to form the hinge line.
6
9
. Build the outer frame using
parts
D1/D2/D3 and D9.
70. Add the horizontal braces D10 and D11.
Page 16
