a)
Loosen the handlebar height adjustment knob (13). Slide the front adjustment
support (14) into the hole axis. Lock in place by tightening the knob.
GR-MG126 Model
Before installing the support in the frame hole, connect the
LCD panel sensor wires located inside the frame.
b)
Attach the handlebar (25) to the support (14) using the washers (18) and the
mounting screws (19).
c)
Place the LCD panel (15) in the central part of the handlebar (16) and fix it with
screws (17). Connect the sensor cable (20) to
the LCD panel (15) and the main frame of the device.
GR-MG121, GR-MG124, GR-MG125
Model
assemble the LCD panel base first.
Then follow the same procedure.
GR-MG121, GR-MG122, GR-MG125
Model
has a phone holder.
To mount it, place it on the handlebar frame and press down.
CAUTION!
When connecting the wires, the connecting parts should be on
the same side!
STEP IV